38
En
Setup menu
Bass Out
Use this feature to select the speakers from which the LFE
(low-frequency effect) and the low-frequency signals will
be output.
Output of LFE signals
Output of low-frequency signals
When “Front” is selected, you cannot adjust the subwoofer level
using the pop up menu.
Crossover
Use this feature to select the crossover frequency of
speakers that are set to “Small”. All frequencies below the
selected frequency are sent to the subwoofer or to the
speakers set to “Large”.
Choices: 40Hz, 60Hz,
80Hz
, 100Hz, 120Hz, 160Hz,
200Hz
Subwoofer Phase
Use this feature to switch the phase of your subwoofer if
the bass sound is too weak or unclear.
■
Speaker Level
Use this feature to manually balance the speaker levels.
Control range: –20 to +20 (Test Tone: Off, On)
Initial setting: 0 (Test Tone: Off, SWFR: +6)
Control step: 1
■
Reset
Use this menu to reset the speaker settings.
Use this menu to change the various sound settings.
The choices indicated in bold are selected by default.
■
Air Surround Xtreme
The AIR SURROUND XTREME technology enables you
to enjoy up to 7.1-channel sound (when multi-channel
PCM signals are input) without using surround speakers
by simulating sound from virtual speakers.
• When surround speakers are connected, “- - -” is displayed and
you cannot set the “Air Surround Xtreme” setting. The AIR
SURROUND XTREME function is not available in this case.
• When DSP Program is set to “Off” or “Music Enhancer”, the
AIR SURROUND XTREME function is deactivated.
• When “Air Surround Xtreme” is set to “Yes”, the connected
external sources output Dolby Digital or PCM signals instead of
Dolby TrueHD or Dolby Digital Plus signals. For details, refer
to the owner’s manual of the component.
Choice
Subwoofer and speakers
Subwoofers
Front
speakers
Other
speakers
Both
Output
Not output
Not output
Subwoofer
Output
Not output
Not output
Front
Not output
Output
Not output
Choice
Subwoofer and speakers
Subwoofers
Front
speakers
Other
speakers
Both
*1
*1 Output(s) the low-frequency signals of the front channels and
other speakers set to “Small”.
*2
*2 Always output the low-frequency signals of the front
channels.
*3
*3 Output the low-frequency signals if the speakers are set to
“Large”.
Subwoofer
*4
*4 Outputs the low-frequency signals of the speakers set to
“Small”.
*3
*3
Front
Not output
*1
*3
Note
Choice
Functions
Normal
Does not change the phase of your
subwoofer.
Reverse
Sets the phase of the subwoofer to reverse.
Choice
Adjusted speaker
Test Tone
Turns the test tone output on or off.
FL
Adjusts the front left speaker level.
FR
Adjusts the front right speaker level.
C
Adjusts the center speaker level.
SL
Adjusts the surround left speaker level.
SR
Adjusts the surround right speaker level.
SWFR
Adjusts the subwoofer level.
Choice
Functions
Yes
Resets the speaker related settings.
No
Cancels resetting.
Sound menu
Choice
Functions
On
Turns on the AIR SURROUND XTREME
function.
Off
Turns off the AIR SURROUND XTREME
function.
Notes
01EN_00_YMC-700_500_U.book Page 38 Wednesday, April 8, 2009 11:46 AM
