Yamaha WaveRunner VXR VX1800A, Service Manual

Page: 101 / 318

Engine mount
5-10
32. Suspend the engine unit using all 3 engine
hangers, and then separate the unit from
the engine mounts and move it forward to
disconnect the coupling.
33. Lift the engine unit slightly, and then lower
the front of the unit. Repeat this step until
the engine unit can be removed from the
engine compartment.
When removing the engine unit, take care
to avoid causing damage to the hull liner
and deck opening.
34. Lift the engine unit out vertically.
Engine mount and spacer check
1. Check the engine mounts and spacers.
Replace if cracked or damaged.
TIP:
• Write down the position of each engine
mount so that it can be installed in its original
position.
• When replacing the engine mounts, make
sure to check the coupling clearance.
Engine unit installation
When installing the engine unit, take care to
avoid causing damage to the hull liner and
deck opening.
1. Suspend the engine unit using all 3 engine
hangers.
2. Lower the front of the engine unit.
3. Lower the engine unit into the engine com-
partment vertically.
4. Lift the front of the engine unit slightly, and
then lower the unit. Repeat this step until
the drive and driven couplings are aligned.
5. Move the engine unit rearward to connect
the driven coupling “1”, and then lower the
unit onto the engine mounts.