Yamaha VX600ERG, Service Manual

Page: 107 / 287

POWR
TR
4-9
T
R
.
.
1
3
5
2
4
6
PRIMARY SHEAVE AND DRIVE V-BELT
5. Install:
•
Weight
•
Nuts
1
Nut (weight):
6 Nm (0.6 m · kg, 4.3 ft · lb)
NOTE:
To maintain the primary sheave balance, the bolts
2
must be installed with their threaded portions pointing
in a counterclockwise direction, as illustrated.
6. Install:
•
Primary sheave spring
1
•
Primary sheave cap
2
NOTE:
Be sure the sheave cap match mark (X) is aligned
with the spider match mark (X).
Bolt (primary sheave cap):
14 Nm (1.4 m · kg, 10 ft · lb)
7. Tighten:
•
Bolts (VX600ER/VT600)
Tightening steps:
•
Temporarity tighten the bolts
1
~
6
in the order
shown.
Bolt (starter motor driven gear):
20 Nm (2.0 m · kg, 14 ft · lb)
NOTE:
•
Clean the threads.
•
Apply LOCTITE
®
#648.
T
R
.
.
T
R
.
.
SEA4200
SEA4210
SEA4220