9-22
SPEC
CABLE ROUTING
1
Water temperature sensor
coupler
2
Fasten the carburetor switch
leads and water temperature
sensor leads and ignition coil
leads to the coolant hose with a
plastic band. For the VX600ER/
VT600, include the starter motor
and battery negative leads.
3
Ignition coil coupler
4
Connectors of the carburetor
switch
5
Fasten the starter motor and
battery negative leads and starter
relay leads to the coolant hose
with a plastic band. (VX600ER/
VT600)
6
Fasten the coolant reservoir hose
and coolant hose with a plastic
clamp.
7
Ensure this is not kink.
8
Fasten the starter motor and
battery negative leads to the
coolant hose with a plastic band
above the brake caliper.
(VX600ER/VT600)
9
Route the starter motor and
battery negative leads behind the
coolant hose. (VX600ER/VT600)
0
To the starter relay (VX600ER/
VT600)
A
Brake hose
B
To the battery negative terminal
(VX600ER/VT600)
C
To the gear position switch
(VX600ER/VT600)
CABLE ROUTING
Summary of Contents for VX600ERG
