Yamaha ULTRAMATIC KODIAK 400 YFM400FAR, Owner'S Manual

Page: 338 / 426

8-81
1. Throttle stop screw
1. Vis d’arrêt de l’accélérateur
1. Tornillo de tope del acelerador
EBU01258
Idle speed adjustment
NOTE:
_
A diagnostic tachometer must be used for this pro-
cedure.
_
1. Start the engine and warm it up for a few min-
utes at approximately 1,000 to 2,000 r/min.
Occasionally rev the engine to 4,000 to
5,000 r/min. The engine is warm when it
quickly responds to the throttle.
2. Remove panel D. (See page 8-17 for removal
and installation procedures.)
3. Connect the tachometer to the spark plug
lead, and then set the idle to the specified
idling speed by adjusting the throttle stop
screw. Turn the screw in direction
a
to in-
crease the engine speed, and in direction
b
to decrease the engine speed.
4. Install the panel.
Specified idle speed:
1,450–1,550 r/min
U5TE60.book Page 81 Monday, June 10, 2002 8:47 AM