Yamaha TX4n Reference Manual Download Page 33

Page: 33 / 60

TX6n/5n/4n Reference Manual

Panel Operations

■

Slot Input Router

Here you can specify the routing and gain from the slot input to each input channel.

• To specify the routing to the input channel, press the second-from-right function button (SELECT 1/SELECT 2) to select

the input channel.

■

Input On/Off

Here you can turn the input to the 4x4 Matrix Mixer on/off for each input channel.

■

4x4 Matrix Mixer

This is a 4-input 4-output mixer with the input channels and output channels arranged in a matrix.

Parameter name

Range

Explanation

Input Assign

Slot Ch1 – Slot Ch16

Specifies the routing from the slot input to each input channel.

Input Gain

-24.0 dB – +24.0 dB

Specifies the gain from the slot input to each input channel.

Parameter name

Range

Explanation

In Polarity

NORMAL, INVERTED

Specifies phase reversal for the signal of each input channel.

In Level

∞

–+10.00 dB

Adjusts the level of each input channel.

Cross Point

ON/OFF

Turns on/off the send from each input channel to each output channel.

NOTE

Summary of Contents for TX4n





























































Search results

Summary of Contents for TX4n

Reviews:

Related manuals for TX4n

Brands by name

Popular brands

Yamaha TX4n, Reference Manual

Search results

Summary of Contents for TX4n

Reviews:

Related manuals for TX4n

Brands by name

Popular brands