Yamaha TX4n Reference Manual Download Page 3

Page: 3 / 60

TX6n/5n/4n Reference Manual

Introduction

About the documentation

This manual mainly explains operation and specifications for the TX6n, TX5n, and TX4n (subsequently referred

to as TXn) power amplifiers. When using the TXn, you will also need to consult various manuals other than this

document.

●

Manuals other than this document

PDF manuals and Amp Editor can be downloaded from the following URL.

http://www.yamahaproaudio.com/

• In order to view the downloaded manuals, Adobe Reader must be installed in your computer. If you don’t have

Adobe Reader, please access the Adobe Corporation’s website at the following URL, and download Adobe Reader
(free of charge).

http://www.adobe.com/

Setup

For details on setting up the TXn and Amp Editor, refer to the “TX6n/5n/4n Owner’s Manual” and “Amp Editor

Owner’s Manual.”

TX6n/5n/4n Owner’s Manual (printed)

Explains mainly the initial setup.

Amp Editor Installation Guide (PDF)

Explains the installation procedure for Amp Editor and the uninstallation
procedure.

Amp Editor Owner’s Manual (PDF)

Explains how to use Amp Editor.

NOTE

Summary of Contents for TX4n





























































Search results

Summary of Contents for TX4n

Reviews:

Related manuals for TX4n

Brands by name

Popular brands

Yamaha TX4n, Reference Manual

Search results

Summary of Contents for TX4n

Reviews:

Related manuals for TX4n

Brands by name

Popular brands