manualshive.com logo in svg

Yamaha TX4n, Reference Manual

The Yamaha TX4n Owner's Manual is available for free download at manualshive.com. This comprehensive manual provides detailed instructions and guidelines, empowering users to maximize their experience with the Yamaha TX4n. Easily access the manual to learn about the product's features, setup, and operation in just a few clicks.

Share
Download
background image

TX6n/5n/4n  Reference Manual

25

Panel Operations

3.

Use encoder A to move the cursor to the parameter that you want to edit, and encoder B to edit the parameter
value.

4.

If the parameter value is blinking, press the [ENTER] button to confirm the value.

Non-blinking parameter values are reflected by the amplifier in real time.

■

General

Here you can make general settings for the amplifier, such as gain/input sensitivity and amp mode.

●

Sensitivity/Amp Gain

●

Stereo/Bridge/Parallel

●

Attenuation Link

Parameter name

Range

Explanation

Amp Gain

19.8–43.8 dB

Specifies the gain of each channel. The gain and input sensitivity are 
linked; you may edit either one.

Sensitivity

TX6n: 24.0–0.0 dBu

TX5n: 22.6–

 

-1.4 dBu

TX4n: 21.4–

 

-2.6 dBu

Specifies the input sensitivity of each channel. Since the maximum out-
put is different for each model, the settable range will differ for each 
model. The gain and input sensitivity are linked; you may edit either 
one.

Gain Mode

Link ON/OFF

Specifies whether the gain and input sensitivity settings will be linked 
between channels.

Standby/On

Standby/On

Switches the power between Standby and On modes. Standby is a 
state in which the speaker output’s power amp section is off (operation 
other than speaker output will continue).

Parameter name

Range

Explanation

Amp Mode

Stereo

The amplifier will operate in stereo, with channels A and B indepen-
dent.

Bridge

The amplifier will operate as a monaural high-power amplifier that 
bridge-connects the speaker output’s power amp sections, with the out-
put signal from the channel A speaker processor as the source.

Parallel

The amplifier will operate as a two-channel monaural amplifier, with the 
output signal from the channel A speaker processor as the source.

Parameter name

Range

Explanation

Att Link

ON/OFF

Specifies whether the attenuator settings will be linked between chan-
nels.

Summary of Contents for TX4n





























































Reviews:

No comments

Related manuals for TX4n

Gallien-Krueger 250ML Service Manual preview
250ML
Brand: Gallien-Krueger Pages: 19
TAG MCLAREN AUDIO F3 Series Manual preview
F3 Series
Brand: TAG MCLAREN AUDIO Pages: 17
QSC MX 1500a Brochure preview
MX 1500a
Brand: QSC Pages: 1
Kramer VM-73 User Manual preview
VM-73
Brand: Kramer Pages: 15
Sponsler MN-717-A Installation & Operation Manual preview
MN-717-A
Brand: Sponsler Pages: 4
Kollmorgen Seidel SERVOSTAR 600 Series Assembly, Installation And Commissioning Instructions preview
SERVOSTAR 600 Series
Brand: Kollmorgen Seidel Pages: 68
McIntosh MA7000 Service Manual preview
MA7000
Brand: McIntosh Pages: 36
Pyramid Super Blue PB559X Owner'S Manual preview
Super Blue PB559X
Brand: Pyramid Pages: 12
Crunch Ground Pounder GPV1000.2 User Manual preview
Ground Pounder GPV1000.2
Brand: Crunch Pages: 15
G-Wave BDA-PS9-37/37-90-C Installation And Operating Manual preview
BDA-PS9-37/37-90-C
Brand: G-Wave Pages: 18
MTX TX2275 Manual preview
TX2275
Brand: MTX Pages: 19
Pro-Ject Audio Systems Phono Box MM Instructions For Use preview
Phono Box MM
Brand: Pro-Ject Audio Systems Pages: 3
Integra ADM 2.1 Instruction Manual preview
ADM 2.1
Brand: Integra Pages: 8
Crate KXB50 User Manual preview
KXB50
Brand: Crate Pages: 4
PSSO 10451695 User Manual preview
10451695
Brand: PSSO Pages: 28
Parasound Zpre Zone Owner'S Manual preview
Zpre Zone
Brand: Parasound Pages: 12
Sonelco P6241 Manual preview
P6241
Brand: Sonelco Pages: 2
Mark Levinson 38S Operating Manual preview
38S
Brand: Mark Levinson Pages: 38

Brands by name

Popular brands

Load more brands