Yamaha TT-R125(P), Owner'S Service Manual

Page: 422 / 509

5 - 29
CHAS
REAR WHEEL AND REAR BRAKE
5. Install:
●
Springs 1
●
Brake shoes 2
On brake shoe plate 3
NOTE:
●
Apply the lithium soap base grease on the
pivot pin.
●
When installing the springs and brake shoes,
take care not to damage the springs.
●
When replacing the brake shoes, replace the
springs as a set.
WARNING
Do not apply grease to the brake shoe lin-
ings.
New
Rear wheel
1. Install:
●
Wheel bearing 1
●
Spacer
2
●
Wheel bearing 3
●
Oil seal 4
NOTE:
●
Apply the lithium soap base grease on the oil
seal lip when installing.
●
Install the bearing with seal facing outward.
●
Use a socket that matches the outside diam-
eter of the race of the bearing.
●
Right side of bearing shall be installed first.
●
Install the oil seal with its manufacture’s
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
New