3
STAGEPAS 600i
SPECIFICATIONS
General Specifications
Maximum Output Power (SPEAKERS L/R)
340 W + 340 W/4 Ω @Dynamic at 1 kHz
280 W+280 W/4Ω @10 % THD at 1 kHz
≧
230 W+230 W/4Ω @1 % THD at 1 kHz
Frequency Response
-3 dB, +1 dB @ 40 Hz-20 kHz, 1 W Output/4Ω
(without EQ and SP EQ) (SPEAKERS L/R)
-3 dB, +1 dB @ 40 Hz-20 kHz, +4 dBu 10 kΩ Load
(MONITOR OUT)
Total Harmonic Distortion
≦
0.5 % @20 Hz-20 kHz, +11 dBu 10 kΩ (MONITOR OUT)
Hum & Noise (Rs= 150 Ω, MIC/LINE switch=MIC)
≦
-113 dBu Equivalent input noise (CH1-4)
≦
-58 dBu Residual output noise (SPEAKERS L/R)
Crosstalk (1 kHz)
≦
-70 dB between input channels
Phantom Voltage
+30 V (CH1, 2)
Weight
25.4 kg (56 lbs) (Speaker 10.8 kg x 2 + Mixer 3.8 kg)
Package Contents
STAGEPAS 600i (includes two MODEL 600S Speakers and a
Powered Mixer), Cover Panel, Power Cord (2m), two Speaker
Cables (6m), 12 Non-Skid Pads, Owner’s Manual
Power Consumption
35 W (Idle), 100 W (1/8 Power)
Power Requirement
100 V - 240 V 50 Hz/60 Hz
Input Channel Equalization
±15 dB
HIGH: 8 kHz shelving
MID: 2.5 kHz peaking
LOW: 100 Hz shelving
Supported iPod/iPhone models (as of August 2012)
iPod touch (1st, 2nd, 3rd, and 4th generation), iPod classic,
iPod nano (2nd, 3rd, 4th, 5th, and 6th generation), iPhone
4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone For updated
information, check the Yamaha Pro Audio website
(http://www.yamahaproaudio.com/).
Speakers (MODEL 600S)
Enclosure
2 way bass-reflex type
Speaker Unit
LF: 10” (25 cm) Cone
HF: 1.4” (3.56 cm) Compression Driver
Crossover Frequency
2.8 kHz
Frequency Range
55 Hz-20 kHz (-10 dB)
Maximum Output Level
129 dB SPL (Measured peak IEC noise@1 m)
Coverage Angle
90° (Horizontal)/60 ° (Vertical)
Input Terminals
MIC/LINE
Input
Impedance
Source
Impedance
Input Level
Connector Type
Sensitivity
Nominal
Max. before
Clipping
CH IN 1-2
XLR
MIC
3 kΩ
150 Ω Mics
-56 dBu
-35 dBu
-10 dBu
XLR-3-31
LINE
-30 dBu
-9 dBu
+16 dBu
CH IN 3-4
XLR
MIC
3 kΩ
150 Ω Mics
-56 dBu
-35 dBu
-10 dBu
XLR Combo
LINE
-30 dBu
-9 dBu
+16 dBu
Phone
MIC
10 kΩ
(Hi-Z 1 MΩ)
150 Ω Lines
(Hi-Z 10 kΩ)
-50 dBu
-29 dBu
-4 dBu
LINE
-24 dBu
-3 dBu
+22 dBu
CH IN 5/6
Phone
-
10 kΩ
150 Ω Lines
-24 dBu
-3 dBu
+22 dBu
Phone*
CH IN 7/8
Phone
-
10 kΩ
150 Ω Lines
-24 dBu
-3 dBu
+22 dBu
Phone*
Pin
-
10 kΩ
150 Ω Lines
-24 dBu
-3 dBu
+22 dBu
RCA Pin
CH IN 9/10
Phone
-
10 kΩ
150 Ω Lines
-24 dBu
-3 dBu
+22 dBu
Phone*
Mini
-
10 kΩ
150 Ω Lines
-24 dBu
-3 dBu
+22 dBu
Stereo Mini
Output Terminals
Output
Impedance
Load
Impedance
Output Level
Connector Type
Nominal
Max. before
Clipping
Typ at
THD+N 10%
Dynamic
SPEAKERS OUT [L,R]
<0.1 Ω
4 Ω Speakers
62.5 W
230 W
280 W
340 W
Phone*
MONITOR OUT [L,R]
600 Ω
10 kΩ Lines
+4 dBu
+20 dBu
-
-
Phone*
SUBWOOFER OUT
150 Ω
10 kΩ Lines
-3 dBu
+17 dBu
-
-
Phone*
Input Characteristics
Output Characteristics
0 dBu=0.775 Vrms, 0 dBV=1 Vrms
Phone*: Unbalanced
