Yamaha SCORPIO 54D Owner'S Manual Download Page 28

Page: 28 / 86

PRE-OPERATION CHECKS

4-2

EAU15610

Pre-operation check list

ITEM

CHECKS

PAGE

Fuel

• Check fuel level in fuel tank.

• Refuel if necessary.

• Check fuel line for leakage.

3-6

Engine oil

• Check oil level in engine.

• If necessary, add recommended oil to specified level.

• Check vehicle for oil leakage.

6-8

Front and rear suspension

• Check operation
• Check oil suspention for leakage.

6-23

Front brake

• Check operation.

• If soft or spongy, have Yamaha dealer bleed hydraulic system.

• Check brake pads for wear.

• Replace if necessary.

• Check fluid level in reservoir.

• If necessary, add recommended brake fluid to specified level.

• Check hydraulic system for leakage.

6-18, 6-19

Rear brake

• Check operation.

• Check pedal free play.

• Adjust if necessary.

6-17

Throttle grip

• Make sure that operation is smooth.

• Check cable free play.

• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and

grip housing.

6-12, 6-13

Control cables

• Make sure that operation is smooth.

• Lubricate if necessary. 6-21

Drive chain

• Check chain slack.

• Adjust if necessary.

• Check chain condition.

• Lubricate if necessary.

6-19, 6-20

U5YPE0E0.book Page 2 Wednesday, February 23, 2005 4:22 PM

Summary of Contents for SCORPIO 54D























































































Search results

Summary of Contents for SCORPIO 54D

Reviews:

Related manuals for SCORPIO 54D

Brands by name

Popular brands

Yamaha SCORPIO 54D, Owner'S Manual

Search results

Summary of Contents for SCORPIO 54D

Reviews:

Related manuals for SCORPIO 54D

Brands by name

Popular brands