Yamaha SCORPIO 54D Owner'S Manual Download Page 25

Page: 25 / 86

INSTRUMENT AND CONTROL FUNCTIONS

3-10

U5YPE0E0.book Page 8 Wednesday, February 23, 2005 4:22 PM

a. Unlock.

To remove the seat

1. Insert the key into the seat lock, and

then turn it clockwise

2. Pull the seat off.

EAU13790

Seat

To install the seat

1. Insert the projection on the front

of the seat into the seat holder

as shown.

2. Push the rear of the seat down to

lock it in place.

3. Turn the key counter clockwise

TIP:

Make sure that the seat is properly

secured before riding.

1. Projection

2. Seat holder

Helmet holders

EAU14311

1. Helmet holder

The helmet holders are located under

the seat.

To secure a helmet to a helmet holder

1. Open the seat. (See page 3-9 for

2. Attach a helmet to a helmet holder,

and then securely close the seat.

WARNI

WARNING !

Never ride with a

helmet attached to the helmet

holder, since the helmet may

hit objects, causing loss of control

and possibly an accident.

[EWA10161]

and then remove it.

removal and installation prose-

dures.)

Summary of Contents for SCORPIO 54D























































































Search results

Summary of Contents for SCORPIO 54D

Reviews:

Related manuals for SCORPIO 54D

Brands by name

Popular brands

Yamaha SCORPIO 54D, Owner'S Manual

Search results

Summary of Contents for SCORPIO 54D

Reviews:

Related manuals for SCORPIO 54D

Brands by name

Popular brands