background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-1

6

EAU17241

Safety is an obligation of the owner. Pe-

riodic inspection, adjustment and lubri-

cation will keep your vehicle in the

safest and most efficient condition pos-

sible. The most important points of in-

spection, adjustment, and lubrication

are explained on the following pages.

The intervals given in the periodic

maintenance and lubrication chart

should be simply considered as a gen-

eral guide under normal riding condi-

tions. However, DEPENDING ON THE

WEATHER, TERRAIN, GEOGRAPHI-

CAL LOCATION, AND INDIVIDUAL

USE, THE MAINTENANCE INTER-

VALS MAY NEED TO BE SHORT-

ENED.

WARNING

EWA10320

If you are not familiar with mainte-

nance work, have a Yamaha dealer

do it for you.

EAU17381

Owner’s tool kit  

TIP :

If you do not have the tools or experi-

ence required for a particular job, have

a Yamaha dealer perform it for you.

WARNING

EWA10350

Modifications not approved by

Yamaha may cause loss of perfor-

mance and render the vehicle un-

safe for use. Consult a Yamaha

dealer before attempting any chang-

es.

1. Owner’s tool kit

The owner’s tool kit is located inside the

storage compartment under the seat.

(See page 3-9.)

The service information included in this

manual and the tools provided in the

owner’s tool kit are intended to assist

you in the performance of preventive

maintenance and minor repairs. How-

ever, additional tools such as a torque

wrench may be necessary to perform

certain maintenance work correctly.

U5YPE0E0.book  Page 1  Wednesday, February 23, 2005  4:22 PM

EAU17229

 

 

 

EAUN0100 

NOTICE: 

ECAN0080 

Improper disposal of drained fluids

(i.e., oil, coolant,etc) and battery

are  harmful  to the environment.

Contact a  Yamaha  dealer for pro-

per disposal to  protect the

 

envi-

ronment.

1

Summary of Contents for SCORPIO 54D























































































Reviews: