Yamaha SCORPIO 54D Owner'S Manual Download Page 80

Page: 80 / 86

SPECIFICATIONS

8-1

Dimensions:

Overall length:

2025 mm (79.7 in)

Overall width:

765 mm (30.1 in)

Overall height:

1095 mm (43.1 in)

Seat height:

770 mm (30.3 in)

Wheelbase:

1295 mm (50.1 in)

Ground clearance:

165 mm (6.50 in)

Minimum turning radius:

2100 mm (82.7 in)

Weight:

With oil and fuel:

141 kg (331 lb)

Engine:

Engine type:

Air cooled 4-stroke, SOHC

Cylinder arrangement:

Forward-inclined single cylinder

Displacement:

223 cm³

Bore

stroke:

70.0

58.0 mm (2.76 x 2.28 in)

Compression ratio:

9.5 : 1

Starting system:

Electric starter and kickstarter

Spark plug (s):

Manufacturer/model:

NGK DP8EA-9

Spark plug gap:

0.8–0.9 mm (0.031–0.035 in)

Clutch:

Clutch type:

Wet, multiple-disc

Transmission:

Primary reduction system:

Spur gear

Primary reduction ratio:

74/24 (3.083)

Secondary reduction system:

Chain drive

Secondary reduction ratio:

44/15 (2.933)

Transmission type:

Constant mesh 5-speed

Operation:

Left foot operation

Gear ratio:

1st:

36/14 (2.571)

2nd:

32/19(1.684)

3rd:

28/22 (1.273)

4th:

26/25 (1.040)

U5YPE0E0.book Page 1 Wednesday, February 23, 2005 4:22 PM

EAU26320

Lubrication system:

Wet sump

Engine oil:

Type:

YAMALUBE 4 T SJ. 20W-50 MA
or SAE20W40 or SAE20W50

Recommended engine oil grade:

API service SF, SG type or higher

JASO MA

Engine oil quantity:

Periodic oil change :

1.2 L (1.26 US qt) (0.96 Imp.qt)

Whit oil filter element replacement :

1.3 L (1.36 US qt) (1.04 lmp.qt)

Air filter:

Air filter element:

Wet type element

Fuel:

Recommended fuel:

Regular unleaded gasoline only

Fuel tank capacity:

13.4 L (3.54 US gal) (2.95 Imp.gal)

Carburetor:

Manufacturer:

MIKUNI

Type

quantity:

BS30 x 1

Total Capasity

1.4 L (1.47 US qt) (1.12 Imp.qt)

5th:

23/27 (0.852)

Fuel reserve amount:

2.4 L (0.63 US gal) (0.93 Imp.gal)

Summary of Contents for SCORPIO 54D























































































Search results

Summary of Contents for SCORPIO 54D

Reviews:

Related manuals for SCORPIO 54D

Brands by name

Popular brands

Yamaha SCORPIO 54D, Owner'S Manual

Search results

Summary of Contents for SCORPIO 54D

Reviews:

Related manuals for SCORPIO 54D

Brands by name

Popular brands