PERIODIC MAINTENANCE AND MINOR REPAIR
6-9
6
U5YPE0E0.book Page 11 Wednesday, February 23, 2005 4:22 PM
TIP :
Skip step 6-10 if the oil filter element is
not being cleaned.
6. Remove the oil filter element cover
by removing the bolts.
3
2
1
1. Oil filter element drain bolt
2. Oli filter element cover
3. Bolt (
×
2)
5
.
Remove the oil filter element drain
bolt to drain the oil from the oil fil-
t
2
1
1. Oli filter element
2. O-ring (
×
3)
7
. Remove
the
oil filter element
and
O-rings.
8
.
Check the O-rings for damage and
replace it if necessary
.
9
. Clean the oil
filter element
with
solvent
, and then install it
.
TIP :
Check the oil filter element for damage
and repalce it if necessary.
10
. Install the oil filter element cover by
installing the bolts, then tightening
them to the specified torque.
Tightening torque:
Oil filter element cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
TIP:
Make sure that the O-ring is properly
seated.
11
. Install the oil filter element
drain
bolt, and then tighten it to the
specified torque.
12
. Install the
engine oil drain bolt, and
and
then tighten
it to the specified
torque.
Tightening torque:
Oil filter element
drain
bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Engine o
il
drain
bolt:
2
0 Nm (
2
.0 m·kgf,
14.4
ft·lbf)