Yamaha SCORPIO 54D Owner'S Manual Download

Page: 57 / 86

PERIODIC MAINTENANCE AND MINOR REPAIR

6-21

EAU22380

Checking the front brake pads

and rear brake shoes

Front brake pads

EAU22430

1. Brake pad wear indicator groove

The front brake pads and the rear brake

shoes must be checked for wear at the

intervals specified in the periodic main-

tenance and lubrication chart.

Each front brake pad is provided with

wear indicator grooves, which allow

you to check the brake pad wear with-

out having to disassemble the brake.

To check the brake pad wear, check

the wear indicator grooves. If a brake

pad has worn to the point that the wear

indicator grooves have almost disap-

peared, have a Yamaha dealer replace
the brake pads as a set.

EAU22540

Rear brake shoes

The rear brake is provided with a wear

indicator, which allows you to check the

brake shoe wear without having to dis-

assemble the brake. To check the

brake shoe wear, check the position of

the wear indicator while applying the

brake. If a brake shoe has worn to the

point that the wear indicator reaches

the wear limit line, have a Yamaha

dealer replace the brake shoes as a

set.

1. Brake shoe wear indicator

2. Brake shoe wear limit line

U5YPE0E0.book Page 20 Wednesday, February 23, 2005 4:22 PM

Summary of Contents for SCORPIO 54D























































































Search results

Summary of Contents for SCORPIO 54D

Reviews:

Related manuals for SCORPIO 54D

Brands by name

Popular brands

Yamaha SCORPIO 54D, Owner'S Manual

Search results

Summary of Contents for SCORPIO 54D

Reviews:

Related manuals for SCORPIO 54D

Brands by name

Popular brands