118
En
Using multi-zone configuration
■
Adjusting the volume level of Zone 2 or
Zone 3
Rotate
R
VOLUME
on the front panel (or press
C
/–
) to adjust the volume level of the
selected zone.
y
Press
E
MUTE
on the remote control to mute the sound output to
the selected zone.
When you use the external amplifiers in Zone 2 or Zone 3,
C
/–
can be used only when “Zone2 Volume” or
“Zone3 Volume” is set to “Variable” in “Zone2 Set” or “Zone3
Set” (see page 94).
■
Adjusting the balance of the speaker
level in Zone 2 or Zone 3
Press
E
TONE CONTROL
repeatedly to select
“BALANCE” and then rotate
O
PROGRAM
to
adjust the balance of the front left and right
speaker level of the selected zone.
■
Adjusting the tonal quality of Zone 2 or
Zone 3
Set the operation mode selector to
D
AMP
and
then press
CH +/–
on the remote control to
adjust the high-frequency response (TREBLE) or
TV VOL +/–
to adjust the low-frequency
response (BASS) respectively.
y
You can also adjust the tonal quality of Zone 2 or Zone 3 by using
E
TONE CONTROL
on the front panel. For details, see
“Adjusting the tonal quality” on page 51.
Check that “ZONE 2” or “ZONE 3” is displayed in the display
window (
B
) of the remote control before you adjust the tonal
quality of the corresponding zone (see page 117).
Operate the following operations after activating the Zone 2
or Zone 3 operation mode.
Note
Note
–
+
TV VOL
+
–
CH
TV
SOURCE
AMP
TREBLE
BASS
