Yamaha RTX810 Instruction Manual Download

Page: 160 / 170

160

ble

tin

When the system goes into a pending status

for selecting a setting file, select a setting file
that is not shown, from 0 to 4.2, and press the
Enter key.

If the firmware is started, the firmware version and
other information is displayed.

Wait for around 10 seconds, and press the

Enter key.

When “Password:” appears, press the Enter

key.

When “>” is displayed, you can enter a console
command.

Tip

If the login password has been set, enter the login password.

Type in “administrator”, and press the Enter

key.

When “Password:” appears, press the Enter
key.

Tip

If an administration password has been set, enter the
administration password.

When “#” appears, enter “cold start” and press

the Enter key.

When “Password:” appears, press the Enter

key.

Tip

If an administration password has been set, enter the
administration password.

The product settings are initialized.

Initializing through button operation of
the product

You can also restore the setting to their factory defaults
by turning the power on while pressing the three buttons;
DOWNLOAD, microSD, and USB buttons.

Turn the power on while pressing the three

buttons; DOWNLOAD, microSD, and USB
buttons.

DOWN

LOAD

POWER

STATUS

LAN

WAN

micro8D

USB

WAN

STAND

CONSOLE

LAN

DOWNLOAD button

microSD button

USB button

The lamp at the front side of the main unit lights up
and flashes several times.

Turn the power on, wait for 3 seconds, and
then press the three buttons; DOWNLOAD,
microSD, and USB buttons.

The product settings are initialized.

Initializing the product settings

(Continued from the previous page)

Summary of Contents for RTX810











































































































































































Search results

Summary of Contents for RTX810

Reviews:

Related manuals for RTX810

Brands by name

Popular brands

Yamaha RTX810, Instruction Manual

Search results

Summary of Contents for RTX810

Reviews:

Related manuals for RTX810

Brands by name

Popular brands