Operating the product using
a configuration file in an
external memory device
You can operate the product using a configuration file stored
in a commercially-available external memory device (USB
memory stick or microSD card). This is convenient when
you want to store a configuration file for emergency in
an external device and use it only on an as-needed basis,
without changing the configuration file in the product.
Change settings so that the product
can be started by using a configuration
file in an external device
In the “Startup via external memory” field on the “Configure
external device” screen, select “allow”.
To open the “Configure external device” screen
From “Basic configuration page”, click the buttons on the
setup screen in the following order:
▶
“Advanced settings” in the top page
▶
“Configure” of “Configure external device”
Start the product using a configuration
file in an external device
1
Prepare an external memory device storing
a configuration file.
Specify the same file name as that specified in the
“Configuration file name” field on the “Configure
external device” screen.
2
Insert the external device into the USB port
or microSD slot of the product.
The USB lamp or microSD lamp of the product lights
up or flashes.
3
Restart the product.
After the restart, the product automatically loads the
configuration file specified in step 1.
Tip
The content of the configuration file stored in the product
is not overwritten. However, if you change a setting
after the restart, the changed setting is overwritten to the
configuration file stored in the product.
Note
If loading the configuration file from the external device fails,
see “Unable to use USB device” (page 152).
125
O
pe
ra
tin
g a
nd
m
an
ag
in
g t
he
p
ro
du
ct
7
