4 - 23
ENG
CAMSHAFT, ROCKER ARMS AND VALVES
3. Check:
• valve face
Pitting/wear
→
Grind the face.
• valve stem end
Mushroom shape or diameter larger than
the body of the stem
→
Replace.
4. Measure:
• margin thickness
a
Out of specification
→
Replace.
Margin thickness
Intake
1.0 ~ 1.4 mm (0.0394 ~ 0.0551 in)
Exhaust
0.8 ~ 1.2 mm (0.0315 ~ 0.0472 in)
5. Measure:
• valve stem runout
Out of specification
→
Replace.
NOTE:
• When installing a new valve, always replace
the guide.
• If the valve is removed or replaced, always
replace the valve stem seal.
6. Eliminate:
• carbon deposits
(from the valve face and valve seat)
7. Check:
• valve seats
Pitting/wear
→
Reface the valve seat.
8. Measure:
• valve seat width
a
Out of specification
→
Reface the valve
seat.
Runout limit
0.01 mm (0.0004 in)
Valve seat width
Intake
1.2 ~ 1.4 mm (0.0472 ~ 0.0551 in)
<Limit>: 1.6 mm (0.0630 in)
Exhaust
1.2 ~ 1.4 mm (0.0472 ~ 0.0551 in)
<Limit>: 1.6 mm (0.0630 in)
Summary of Contents for Rhino 450 YXR45FAV
