Yamaha Rhino 450 YXR45FAV, Service Manual

Page: 111 / 413

3 - 35
CHK
ADJ
ADJUSTING THE BRAKE LIGHT SWITCH/
CHECKING THE FINAL GEAR OIL LEVEL
1. Check:
• brake light operation timing
Incorrect
→
Adjust.
2. Adjust:
• brake light operation timing
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Hold the main body
1
of the brake light
switch so that it does not rotate and turn the
adjusting nut
2
in direction
a
or
b
until the
brake light comes on at the proper time.
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
Direction
a
Brake light comes on
sooner.
Direction
b
Brake light comes on
later.
CHECKING THE FINAL GEAR OIL LEVEL
1. Place the vehicle on a level surface.
2. Remove:
• oil filler plug 1
3. Check:
• oil level
Oil level should be up to the brim of the filler
hole.
Oil level low
→
Add oil to the proper level.
CAUTION:
Take care not to allow foreign material to
enter the final gear case.
4. Install:
• oil filler plug
Recommended oil
SAE 80 API “GL-4” Hypoid gear
oil
T
R
.
.
23 Nm (2.3 m
·
kg, 17 ft
·
lb)