Multi Mode
MOTIF-RACK XS Owner’s Manual
92
Basic Structure
Ref
erence
V
oice
Multi
Utility
The Contr
ols &
Connector
s
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quic
k Guide
Appendix
Mono / Stereo
Determines the signal configuration for the Audio Input Part, or how the signal or signals are routed
(stereo or mono).
Settings:
L mono, R mono, L+R mono, stereo
L mono .................. Only the L channel of the audio input is used.
R mono .................. Only the R channel of the audio input is used.
L+R mono.............. The L and R channels of the audio input are mixed and processed in mono.
stereo .................... Both the L and R channels of the audio input are used.
Output Select
Determines the specific output(s) for the Audio Input Part signal.
Settings:
For details, refer to Output Select List (page 90) of the Supplementary information.
Chorus Send
(Key Chorus Send)
Determines the Send level of the Audio Input Part signal sent to the Chorus effect. The higher the
value, the more pronounced the Chorus. This parameter can be set only when “Output Select” is set
to “L&R.”
Settings:
0 – 127
Reverb Send
(Key Reverb Send)
Determines the Send level of the Audio Input Part signal sent to the Reverb effect. The higher the
value, the more pronounced the Reverb. This parameter can be set only when “Output Select” is set
to “L&R.”
Settings:
0 – 127
Dry Level
Determines the level of the Audio Input Part which has not been processed with the System Effects
(Reverb, Chorus). This parameter can be set only when “Output Select” is set to “L&R.”
Settings:
0 – 127
4
MEQ (Master EQ)
From this display you can apply five-band equalization to all parts of the
selected Multi.
Shape
Enables you to select one of two equalizer shapes: shelving or peaking. This parameter is available
for Low and High.
Settings:
shelv (shelving type), peak (peaking type)
shelv
This type of EQ shape lets you attenuate/boost the signal at frequencies above or below the specified Frequency setting.
peak
This type of EQ shape lets you attenuate/boost the signal at the specified Frequency setting.
Freq
(Frequency)
Frequencies around this point are attenuated /boosted by the “Gain” setting below.
Settings:
Low
When the Shape is set to “shelv”: 32Hz – 2.0kHz
When the Shape is set to “peak”: 63Hz – 2.0kHz
Lo-Mid, Mid, Hi-Mid
100 Hz – 10.0 kHz
High
500 Hz – 16.0 kHz
Low
High
Hi-Mid
Mid
Lo-Mid
–
+
0
Gain
Q (frequency bandwidth)
5 bands
Frequency
–
+
0
–
+
0
Gain
EQ Low
Frequency
Gain
EQ High
Frequency
Frequency
Frequency
–
+
0
Gain
Frequency
Frequency
