Voice Mode
MOTIF-RACK XS Owner’s Manual
82
Basic Structure
Ref
erence
V
oice
Multi
Utility
The Contr
ols &
Connector
s
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quic
k Guide
Appendix
Low Gain
This parameter is available only when the Type (EQ Type) parameter is set to “2 Band” or “P.EQ.”
When setting to “2 Band,” this determines the amount by which signals below the “Low Freq” will be
boosted/attenuated. When setting to “P.EQ,” this determines the amount by which signals in the area
of the center frequency will be boosted/attenuated.
Settings:
-12.00dB – +0.00dB – +12.00dB
High Gain
This parameter is available only when the Type (EQ Type) parameter is set to “2 Band.” This
determines the amount by which signals above the “High Freq” will be boosted/attenuated.
Settings:
-12.00dB – +0.00dB – +12.00dB
Q
This parameter is available only when the Type (EQ Type) parameter is set to “P.EQ.” This
determines the Q (bandwidth) for the band. The lower the setting, the greater the bandwidth. The
higher the setting, the smaller the bandwidth.
Settings:
0.7 – 10.3
