manualshive.com logo in svg

Yamaha Motif-Rack XS, Owner'S Manual

The Yamaha Motif-Rack XS is a versatile music production synthesizer, ideal for both studio and live performances. Unlock the full potential of this powerful instrument by downloading the free user manual from manualshive.com. The comprehensive manual includes a detailed code list, providing valuable insights into mastering your music creation process.

Share
Download
background image

Multi Mode

MOTIF-RACK XS Owner’s Manual

94

Basic Structure

Ref

erence

V

oice

Multi

Utility

The Contr

ols & 

Connector

s

Setting Up 

Listening to

the Sound

Connections

Using a Computer

Quic

k Guide

Appendix

Part Edit 

Part Edit lets you edit the parameters of the individual Parts that make up a Multi.

Procedure

[MULTI] 

➝

 Select Multi programs 

➝

 [EDIT] 

➝

 Select the desired Part “1” – “16” in the Multi Edit Select display 

➝

 [ENTER] 

➝

Select the desired display in the Multi Part Edit Select display 

➝

 [ENTER] 

➝

 Edit display

1

 Voice

Bank

Number

Determines the Voice assigned to the current Part by specifying the Voice Bank and Number.

Param. with Voice 
(Parameter with Voice)

Determines whether or not the following parameter settings of the selected Voice are copied from 
the Voice to the current Part when you change a Voice for the current Part individually.
• Arpeggio settings
• Filter Cutoff Frequency
• Filter Resonance
• Amplitude EG
• Filter EG
• Pitch Bend Range (Upper/Lower)
• Note Shift

n

Regardless of the Parameter with Voice setting, the following settings are always copied when a Normal Voice is 
selected: Mono/Poly, Porta Sw (Portamento Part Switch), Porta Time (Portamento Time) and Porta Mode 
(Portamento Mode).

Settings: 

off (not copied), on (copied)

Receive Ch 
(Receive Channel)

Determines the MIDI receive channel for the selected Part. Since MIDI data may be coming from 
many channels at once, you should set this to match the particular channel over which the desired 
controlling data is being sent. The MIDI transmit channel for the real-time changing of the Knob-
controlled data is the same as this parameter setting.

Settings: 

01 – 16, off

2

 Play Mode

Volume

Determines the volume for each Part. Use this parameter to adjust the balance between the current 
Part and other Parts. This parameter can be changed directly via the Knob.

Settings: 

0 – 127

Pan

Determines the stereo pan position for the Part. This parameter can be changed directly via the 
Knob. 

Settings: 

L63 (far left) – C (center) – R63 (far right)

n

Note that this Part Pan parameter may have little or no audible effect if the Pan for a specific Element is set to the 
left position and the Pan for another Element is set to the right position.

Voice Elm Pan 
(Voice Element Pan)

Determines whether the individual pan settings for each Element (of the Voice assigned to the 
selected Part) are applied or not. When this is set to “off,” the pan position for the each Element is 
set to center in the Part.

Settings: 

on, off

Note Shift

Adjusts the pitch of the Part in semitones.

Settings: 

24 – +0 – +24

Detune

Adjusts the tuning of the Part in cent increments. 

Settings: 

 -12.8Hz – +0Hz – +12.7Hz

PB Range Upper
(Pitch Bend Range Upper)

PB Range Lower
(Pitch Bend Range Lower)

Determines the maximum Pitch Bend range in semitones. Setting the Upper parameter to +12 would 
result in a maximum pitch rise of one octave when the Pitch Bend wheel is moved upwards. On the 
other hand, a Lower setting of -12 would result in the pitch being lowered up to a maximum of one 
octave (12 semitones) when the Pitch Bend wheel is moved downwards.

Settings: 

-48 semi – +0 semi – +24 semi

Multi Play display

Multi Edit Select display

Multi Part Edit Select display

Edit display 

(example: Voice display)

Summary of Contents for Motif-Rack XS























































































































Reviews:

No comments

Related manuals for Motif-Rack XS

Waeco MagicWatch MWE800 Installation And Operating Manual preview
MagicWatch MWE800
Brand: Waeco Pages: 212
G-Lab KEYZ TUNGSTEN User Manual preview
KEYZ TUNGSTEN
Brand: G-Lab Pages: 2
Zagg Rugged Book Go Instructions Manual preview
Rugged Book Go
Brand: Zagg Pages: 26
Pyle PHRM36 Manual preview
PHRM36
Brand: Pyle Pages: 1
Gear4music VISION KEY-10 User Manual preview
VISION KEY-10
Brand: Gear4music Pages: 32
JARLTECH 8010M Operation Manual preview
8010M
Brand: JARLTECH Pages: 52
Belkin F8E820-USB User Manual preview
F8E820-USB
Brand: Belkin Pages: 8
Life Fitness OST Assembly Instructions Manual preview
OST
Brand: Life Fitness Pages: 26
Adesso PCK-308T User Manual preview
PCK-308T
Brand: Adesso Pages: 2
Adesso AKB-410UB Quick Start Manual preview
AKB-410UB
Brand: Adesso Pages: 1
Adesso AKB-110 Series Quick Start Manual preview
AKB-110 Series
Brand: Adesso Pages: 1
Hama K 404 Operating Instruction preview
K 404
Brand: Hama Pages: 4
Visha NILAH Quick Start Manual preview
NILAH
Brand: Visha Pages: 2
Trust Multimedia Keyboard User Manual preview
Multimedia Keyboard
Brand: Trust Pages: 64
PERFECTPASS StarGazer Manual preview
StarGazer
Brand: PERFECTPASS Pages: 38
Totally Wicked arc Nano User Manual preview
arc Nano
Brand: Totally Wicked Pages: 11
Totally Wicked Curve User Manual preview
Curve
Brand: Totally Wicked Pages: 13
Totally Wicked switz2 User Manual preview
switz2
Brand: Totally Wicked Pages: 2

Brands by name

Popular brands

Load more brands