Yamaha LZ300C, Owner'S Manual

Page: 36 / 84

Operation
31
EMU27130
Controls
●
Check throttle, shift, and steering for prop-
er operation before starting the engine.
●
The controls should work smoothly, with-
out binding or unusual free play.
●
Look for loose or damaged connections.
●
Check operation of the starter and stop
switches when the outboard motor is in the
water.
EMU27150
Engine
●
Check the engine and engine mounting.
●
Look for loose or damaged fasteners.
●
Check the propeller for damage.
●
Check that the battery is in good condition
and the battery connections are secure.
EMU27221
Operation after a long period of
storage
When operating the engine after a long peri-
od (12 months) of storage, proceed as fol-
lows:
1.
Start the engine. Leave it idling.
WARNING
EWM00090
●
Do not touch or remove electrical parts
when starting or during operation.
●
Keep hands, hair, and clothes away
from the flywheel and other rotating
parts while the engine is running.
2. Watch for oil flowing through the oil feed
pipes. After any air in the oil lines has
been expelled, the oil injection system
should supply oil normally. If no oil is
flowing after 10 minutes of idling, consult
your Yamaha dealer.
CAUTION:
ECM00560
●
Be sure to take the above steps when
operating the engine after a long period
of storage. Otherwise engine seizure
could occur.
●
Use straight gasoline only. If premix
fuel is used, the fuel injector could be
damaged.
ZMU01875