SETUP
Setting various functions (Setup menu)
En
93
Test Tone
Turns the test tone generator on or off.
Setting the audio output function of this
unit
Sound setup items
■
Synchronizing audio/video output
Lipsync
Adjusts the delay between audio and video output (Lipsync
function).
Selects a compensation method for the delay between audio and
video output.
Off
(Default)
Does not generate test tones.
On
Generates test tones. While “On” is selected, test
tones are produced constantly.
You can use the test tone in a variety of circumstances. For
example, you can adjust the volume balance settings for each
speaker, or whenever you adjust the settings on the internal
parametric equalizer, you can listen to the actual effect while
operating this unit. Turn the test tone off when you have finished
making adjustments.
Lipsync
Adjusts the delay between video and audio output.
Dynamic Range
Selects the dynamic range adjustment method for
Dolby Digital and DTS playback.
Max Volume
Sets the maximum volume for this receiver.
Initial Volume
Sets the initial volume for when this receiver is turned
on.
Pure Direct Mode
Selects whether or not this unit outputs video signal in
the Pure Direct Mode.
Adaptive DSP Level
Adjusts the level of DSP effect in conjunction with the
volume level.
Auto
(Default)
J
1
When connecting to a TV via HDMI, automatically
adjusts output timing if the TV supports an automatic
lipsync function.
Manual
Manually adjusts the correction time. Select this when
the monitor does not support the automatic lipsync
function.
Adjustable range
0 ms to 250 ms
Default setting
0 ms
Adjustment
increments
1 ms
J
1 :
The setting is effective at the HDMI OUT jack selected by using
r
HDMI
OUT
.
