Yamaha HTR-8063 Owner'S Manual Download Page 124

Page: 124 / 137

124

APPENDIX

Troubleshooting

USB and Network

Problem

Cause

Remedy

See

page

“No Device” is

displayed even when

a USB device is

present.

This unit recognized the USB

storage device as an illegal device.

Turn this unit off then on again.

—

The music files and

directories in the

USB device cannot

be viewed.

The music files and directories are

placed in locations other than the

FAT area.

Place music files and directories in the FAT

area.

—

You are attempting to browse

directory hierarchies of over 8

levels or a directory with more

than 500 files.

Modify the data structure on your USB

device.

—

The PC server/

Internet Radio does

not function

properly.

The IP address is not set properly.

Set the DHCP server function of the router

to ON. Alternately, perform manual

configuration according to the current

operating environment.

The network cable is not

connected.

Connect it properly.

The music in the PC

server cannot be

played back.

The PC does not have Windows

Media Player installed in it.

Install Windows Media Player in the PC.

—

The music is recorded in a format

that cannot be played on this unit.

This unit cannot play music

formats other than WMA, MP3,

MPEG-4 AAC, FLAC and WAV

(PCM format). Also note that it

cannot play certain music files

even if these are recorded in the

WMA, MP3, MPEG-4 AAC,

FLAC, or WAV format.

Play music recorded in a format that this

unit is compatible with.

—

The Internet Radio

cannot be played.

The firewall of the network device

is activated. The Internet Radio

can be played only when it passes

through the port designated by

each radio station. The port

number is variable depending on

radio station.

Check the firewall setting of the network

device.

—

Connection to the Internet is

disconnected.

Check the configuration of the network

device, and then contact the network

connection provider.

—

Display

Cause

Remedy

See

page

Connect error

There is a problem with the signal

path from your network to this

unit.

Check the connection between this unit and

the LAN port on your router or hub.

Make sure your router is properly connected

and turned on. Also, make sure your modem

is properly connected and turned on when

you are attempting to listen to Internet

Radio.

Disconnected

Your USB storage device or USB

portable audio player has been

disconnected from the USB port of

this unit.

Check the connection between this unit and

your USB storage device or USB portable

audio player.

—

The PC server previously

connected to this unit no longer

exists.

Connect this unit to the available PC server.

No Device

There is a problem with the signal

path from your USB storage

device or USB portable audio

player to this unit.

Turn off this unit and reconnect your USB

storage device or USB portable audio player

to the USB port of this unit.

Try resetting your USB storage device or

USB portable audio player.

—

Problem

Cause

Remedy

See

page

Summary of Contents for HTR-8063










































































































































Search results

Summary of Contents for HTR-8063

Reviews:

Related manuals for HTR-8063

Brands by name

Popular brands

Yamaha HTR-8063, Owner'S Manual

Search results

Summary of Contents for HTR-8063

Reviews:

Related manuals for HTR-8063

Brands by name

Popular brands