Yamaha HTR-8063, Owner'S Manual

Page: 110 / 137

SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
En
110
Remote sensor
Activate or deactivate the signal-receiving capability of
the remote control sensor on the front panel of this unit.
Avoiding crossing remote control
signals when using multiple
Yamaha receivers
The remote control of the unit can only receive signals
from a receiver which has an identical ID (remote
control ID). When using multiple Yamaha AV receivers,
you can set each remote control with a unique remote
control ID for its corresponding receiver.
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
control to operate 2 receivers.
m
Numeric keys
o
CODE SET
p
SOURCE/RECEIVER
7 8 5 6
9 0
1 2 3 4
SOURCE RECEIVER
CODE SET
SCENE
VOLUME
MUTE
ENTER
10
REC
ENT
TOP
MENU
POP-UP
MENU
MAIN ZONE 2
INPUT
MUTE
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
MOVIE MUSIC
SLEEP PARTY
FM
INFO MEMORY
AM
PRESET
AUDIO
AV
1 2 3 4
7 5
DOCK
HDMI OUT
MULTI
1 2 3 4
6 V-AUX
USB NET
TUNER PHONO
TUNING
ON SCREEN OPTION
1 1 2 2 3 3 4 4
BD/DVD BD/DVD TV TV CD CD RADIO RADIO
RETURN
DISPLAY
p
o
m
ON
(Default) Activate the signal-receiving capability of
the remote control sensor
OFF
Deactivate the signal-receiving capability
of the remote control sensor
“ON” is recommended in most cases.
R E M O T E S E N S O R
O N
ID1
(Default) Receives the remote control signals set in
ID1.
ID2 Receives the remote control signals set in
ID2.
ID1 is set for both remote control and receiver by
default. To avoid crossing remote control, change the
remote control ID for both remote control and
receiver.
R E M O T E C O N A M P
I D 1
■
To change the remote control ID
1 Press
o
CODE SET using a pointed
object such as the tip of a ballpoint pen.
2
Press
p
SOURCE/RECEIVER .
3 Enter the desired remote control ID code.
To switch to ID1:
Enter “5019” using
m
Numeric keys
.
To switch to ID2:
Enter “5020” using
m
Numeric keys .
Once the remote control code is registered
successfully
p
SOURCE/RECEIVER will blink
twice.
Perform each of the following steps within
1 minute. Settings will be automatically stopped if
more than 1 minute passes since the last operation.
To reset, repeat from step 1.
SOURCE RECEIVER
MAIN ZONE 2
CODE SET
AV
1 2 3 4
Registration successful: blinks twice
Registration failed: blinks 6 times
• If setup fails, repeat from step 1.
• Returns to ID1 after the remote control code is
initialized (
☞
p. 108 ).