SETUP
Controlling the remote control to operate various functions
En
107
Registering remote control codes
for external component operations
The following section describes how to register remote
control code using an example of the registration of the
remote control codes of a Yamaha BD player connected
to AV2 jack.
1
Use “
Remote Control Code Search
” in the CD-
ROM to search the available remote control
codes from the category or manufacturer of
external components.
“2064” can be used for a Yamaha BD player.
2
Press
o
CODE SET
using a pointed object
such as the tip of a ballpoint pen.
3
Press
d
AV2
to switch the input source to
AV2.
J
1
Perform the following steps to register the selected
input source here to the remote control code.
4
Enter a remote control code “2064” using
m
Numeric keys
.
J
2
Once the remote control code is registered successfully
p
SOURCE/RECEIVER
will blink twice.
5
To switch between BD player linked to
scene selections, press
i
SCENE
and at the
same time press
d
AV2
and hold it for
approximately 3 seconds.
Then you can operate the external components by
switching the input source to AV2, or selecting AV2 in
the registered scene.
Same steps for operating other external components,
press
i
SCENE
and at the same time press the input
source key selected in step 3 and hold it for
approximately 3 seconds.
d
AV2
i
SCENE
m
Numeric keys
n
TV control keys
n
A
o
CODE SET
p
SOURCE/RECEIVER
SCENE
2
7
8
5
6
9
0
1
2
3
4
TV
TV VOL
TV CH
SOURCE
RECEIVER
CODE SET
INPUT
MUTE
1
2
3
4
BD/DVD
TV
CD
RADIO
1
2
3
4
BD/DVD
TV
CD
RADIO
VOLUME
MUTE
ENTER
10
REC
ENT
TOP
MENU
POP-UP
MENU
MAIN
ZONE 2
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
MOVIE
MUSIC
SLEEP
PARTY
FM
INFO
MEMORY
AM
PRESET
DOCK
HDMI OUT
MULTI
AUDIO
1
2
3
4
AV
1
3
4
7
5
6
V-AUX
USB
NET
TUNER
PHONO
TUNING
ON SCREEN
OPTION
RETURN
DISPLAY
p
o
n
m
i
d
•
Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than 1
minute passes since the last operation. To reset, repeat
from step 2.
•
Remote control code of an external component cannot
be set from the name or model number of a unit. Use
“
Remote Control Code Search
” in the CD-ROM to
search the available remote control codes from the
category or manufacturer of external components.
•
If multiple remote control codes exist, first set the first
code in the list, if it does not work then try the other
codes.
SOURCE
RECEIVER
CODE SET
MAIN
ZONE 2
AV
1
2
3
4
blinks twice
•
If the registration fails, repeat from step 2.
•
In case of an external component with multiple remote
control codes, the other remote control codes may be
supported. Repeat from step 2 with the other remote
control codes.
2
0
6
4
SOURCE
RECEIVER
MAIN
ZONE 2
CODE SET
AV
1
2
3
4
Registration successful: blinks twice
Registration failed: blinks 6 times
J
1 :
To control a TV that is not the input source, press
n
A
(
n
TV
control keys
) in step 3.
J
2 :
To control a TV that is not the input source, enter the TV remote
control code in step 4.
