• 03: PB Range
❑
Pitch Bend Range
❑
Settings: -48 … +24
This parameter sets the maximum amount of pitch bend which will occur when the pitch controller is set to its
maximum position (e.g. when the pitch bend wheel on a keyboard is rolled all the way up). Minus setting produce a
downward pitch bend. Each increment corresponds to a semitone. A setting of “+12”, for example, results in
maximum upward pitch bend of one octave.
• 04: PB Range Lo
❑
Pitch Bend Low Range
❑
Settings: -48 … +24
“PB RangeLo” sets the maximum amount of pitch bend which will occur when the pitch controller is set to its lowest
position (e.g. when the pitch bend wheel on a keyboard is rolled all the way down). Plus settings produce an
upward pitch bend. Each increment corresponds to a semitone. A setting of “-12”, for example, results in maximum
downward pitch bend of one octave.
• 05: Porta Sw
❑
Portamento Switch
❑
Settings: off, on
Turns portamento “on” or “off”. When “on” the portamento effect will be produced as determined by the “Porta
Mode” and “Porta Time” parameters, below.
• 06: Porta Mode
❑
Portamento Mode (Only available when 05: Porta Sw = on)
❑
Settings: Ful, Fng
Portamento produces a “slide” effect between subsequently played notes. The “Porta Mode” parameter determines
how the portamento slide is produced. When “Ful” is selected the portamento slide will occur between any two
subsequent notes when the “Porta Sw” parameter, above, is “on” even if the first note is released before the second
is played. When “Fng” (Fingered) is selected the portamento slide will only occur if the first note is still held when the
second note is played.
• 07: Porta Time
❑
Portamento Time (Only available when 05: Porta Sw = on)
❑
Settings: 0 … 127
The “Porta Time” parameter sets the portamento time (i.e. the length of the slide between notes). A setting of “0”
produces the fastest portamento time; “127” produces the longest portamento slide effect.
Others
• 01: Mono/Poly
❑
Monophonic/Polyphonic Mode
❑
Settings: mono, poly
Selects the FS1R monophonic or polyphonic note mode. When “mono” is selected the note priority is determined by
the setting of the Priority parameter, below.
41
2/FS1R/EDIT/E.qx 10/19/98 7:23 PM Page 41
Summary of Contents for FS1R
Page 1: ...OWNER S MANUAL ...
Page 87: ...3 FS1R UTILITY E qx 10 20 98 1 17 PM Page 87 ...
