2-20
INSP
ADJ
ECONOMY SWITCH/PILOT LIGHT/
OVERLOAD WARNING LIGHT
ECONOMY SWITCH
1. Check:
• Economy switch
1
È
120 V-60 Hz, 220 V-50 Hz
É
230 V-50 Hz
Checking steps:
• Set the economy switch
1
to “ON”
“
”
a
.
• Start the engine.
• Turn the switch of the electric device con-
nected to the AC outlet “ON” “
”
and “OFF” “
” to check whether the
engine speed increases and decreases.
Does not change
→
Refer to “TROUBLE-
SHOOTING” in CHAPTER 3 and “GEN-
ERATOR SYSTEM” in CHAPTER 4.
1
a
1
a
SWL2050T
È
É
PILOT LIGHT
1. Check:
• Pilot light
1
Checking steps:
• Start the engine.
• Check that the pilot light
1
turns on.
Refer to “GENERATOR SYSTEM” in
CHAPTER 4.
SWL2060T
1
OVERLOAD WARNING LIGHT
1. Check:
• Overload warning light
1
2. Remove:
• Control panel
• Overload warning light connector
Refer to “CONTROL PANEL” in CHAP-
TER 3.
Checking steps:
• Connect three dry cell batteries (1.5 V) to
the overload warning light lead.
• Check that the overload warning light
1
turns on.
Does not turn on
→
Replace.
3. Install:
• Overload warning light connector
• Control panel
Refer to “CONTROL PANEL” in CHAP-
TER 3.
SWL2070T
1
