2-19
INSP
ADJ
SPARK PLUG/
MAIN SWITCH
5. Tighten:
• Spark plug
NOTE:
To prevent thread damage, finger tighten
a
the spark plug before tightening it to the speci-
fied torque
b
.
6. Install:
• Spark plug cap
7. Install:
• Panel 4
Refer to “COVERS, PANELS, AND
CAPS”.
T
R
.
.
Spark plug:
18 Nm (1.8 m · kg, 13 ft · lb)
SVU2280
MAIN SWITCH
1. Check:
• Main switch
Checking steps:
• Set the main switch to “ON” “
” and pull
the recoil starter to start the engine.
• Check that the engine stops when the
main switch is set to “STOP” “
”
1
.
Engine does not stop
→
Refer to “IGNI-
TION SYSTEM” in CHAPTER 4.
È
120 V-60 Hz, 220 V-50 Hz
É
230 V-50 Hz
• Check that the engine starts when the
main switch is set to “START” “
”.
Engine does not start
→
Refer to “ELEC-
TRIC STARTING SYSTEM” in CHAPTER
4.
È
120 V-60 Hz, 220 V-50 Hz
É
230 V-50 Hz
SWL2030T
È
É
SWL2040T
È
É
