3-50
ENG
CARBURETOR
CHOKE CABLE INSTALLATION
1. Inspect:
• Choke knob
1
NOTE:
Push the choke knob
1
entirely in before
installing it to the frame.
2. Install:
• Casing cap (choke cable)
2
NOTE:
Place the choke knob casing cap against the
stay
3
.
3. Install:
• Inner cable
4
NOTE:
Place the carburetor choke valve in its fully
open position
a
, insert the tip of the inner
cable into the drum hole
5
, and then secure it
in place with the screw
6
.
T
R
.
.
Screw:
1.0 Nm (0.1 m · kg, 0.7 ft · lb)
4
a
5
3
2
6
1
SWL3420J
THROTTLE CONTROL MOTOR
1. Inspect:
• Throttle control motor
1
NOTE:
• Install the shaft
a
of the throttle control
motor by aligning it with the groove
b
of the
throttle shaft.
• Install the throttle valve, and then make sure
that is moves smoothly.
• When installing the engine, fully open the
throttle valve.
1
a
b
SVU3840J
