3-20
ENG
MUFFLER
MUFFLER INSTALLATION
1. Install:
• Spark arrester
NOTE:
To install the spark arrester, align the projec-
tion
a
on the spark arrester with the hole
b
in
the muffler.
SWL3190J
2. Install:
• Muffler cap
1
NOTE:
To install the muffler cap, align the slit in the
muffler cap with the projection
c
on the muf-
fler as shown in the illustration.
SWL3200J
3. Install:
• Muffler band
NOTE:
Tighten the muffler band at the angle
d
shown
in the illustration. Make sure that the muffler
band opening and muffler cap slit are not cov-
ering the hole
b
and that the muffler cap has
not come out.
d
30 ~ 60°
4. Install:
• Muffler
NOTE:
Finger tighten the muffler nut
1
and muffler
bolt
2
, and then tighten them to the specified
torques, respectively.
T
R
.
.
Muffler band:
3.5 Nm (0.35 m · kg, 2.5 ft · lb)
T
R
.
.
Muffler nut:
7.0 Nm (0.7 m · kg, 5.1 ft · lb)
Muffler bolt:
16 Nm (1.6 m · kg, 11 ft · lb)
SWL3210J
SWL3220J
