Yamaha DTXPRESS II, Owner'S Manual

Page: 35 / 206

35
5. MAP (Drum Map) Group
This sub-mode is used to edit the User Drum Map. This mode is
divided into the following 9 pages.
5-1. Voice ................................................................ 35
5-2. Volume, Pan .................................................... 36
5-3. Tuning .............................................................. 36
5-4. Layer Balance .................................................. 36
5-5. Decay, Cutoff Frequency ................................. 36
5-6. Reverb Send .................................................... 36
5-7. Alternate Group, Key Assign Mode ................. 37
5-8. Key Off Enable ................................................ 37
5-9. Map Copy ........................................................ 37
* When a User Drum Kit (No. 49-80) is selected, the User Drum
Map is the data that is used to set the note number’s voice, etc.,
that is not assigned to the drum kit’s pad input. Therefore, when a
preset drum kit is selected the User Drum Map will not be used
(the preset drum map will be used) so settings for functions [5-1]
to [5-8] that appear in the display can not be carried out.
Utility Mode
Also, settings cannot be carried out for the following functions [5-
1] to [5-8] when the note numbers for the currently selected drum
kit are already assigned/set.
5-1. Voice
This creates a list that assigns a drum voice for each MIDI note
number. Which MIDI note number
q
will be received and which
drum voice
w
will be sounded.
UT MAP N= 0C -2
( Preset Map )
UT MAP N= 0C -2
( Drumkit Data )
UT MAP N= 0C -2
=K/000 NoAssign
q
w e
4-7. Use Tempo
This function sets the tempo of a song to either change each time
to its default tempo, or remain unchanged at the currently set tempo
when the song is switched.
q
Use Tempo
song
: Changes the tempo of the song to its default tempo when
the song is switched.
global
: The tempo remains unchanged at the currently set tempo
when the song is switched.
4-8. Click Mode
This sets whether or not the click voice will automatically sound
during song playback.
UT SEQ SETUP
ClickMode=manual
q
UT SEQ SETUP
Use Tempo= song
q
q
ClickMode (Click Mode)
manual
: The [CLICK] button will control on/off operation of the
click sound.
sync
: The click will sound during song playback, but will not
sound when the song is stopped. The [CLICK] button
can also be used to control on/off operation of the click
sound.
q
N (MIDI Note Number)
[Range] 0-127 (C-2 to G8)
Sets the MIDI note number. Displays the note number and note
name.
* According to the setting of the Utility mode’s [2-1. Learn Mode]
(P. 29) you can appoint the MIDI note number with key on input
from the MIDI IN/TO HOST jacks.
w
Voice Category
[Range] K, k, S, s, T, t, C, H, P, E, e, L, m
Selects the drum voice category.
Refer to Drum Kit Voice Edit Mode’s [1-1. Voice] (P. 17).