Yamaha DTXPRESS II, Owner'S Manual

Page: 20 / 206

20
Drum Kit Voice Edit Mode
2-4. Hold Mode
Sets the Hold Mode for the voice (layer 1, 2) delivered by input
source
q
.
q
IN (Input Source)
Assigns the input source for the setting. (Refer to P. 16)
w
Hold Mode
on
: Each time the pad is hit either a MIDI key on or MIDI key
off event will be transmitted in succession.
off
: Normal operation. When a pad is hit, only a MIDI key on
event will be transmitted (after the decay time is up, key off
will be transmitted automatically).
* If this function is set to “ on ”, it is recommended that you use the
“ key=high ” setting in [2-3. Alternate Group, Key Assign Mode].
2-5. Key Off Enable
This function decides whether or not to recognize MIDI key off
messages for the voice (layer1, 2) delivered by the input source
q
.
q
IN (Input Source)
Assigns the input source for the setting. (Refer to P. 16)
w
Key Off
enable
: Recognizes key off.
disable
: Does not recognize key off.
* When this function is set to “
disable
”, some voices may sound
continuously. Press the [SHIFT] plus [VOICE] buttons to stop
voices sounding.
2-6. Function
Along with the voice, this function can be used to control other
functions
w
according to the trigger from the input source
q
.
q
IN (Input Source)
Assigns the input source for the setting. (Refer to P. 16)
w
Func (Function)
Selects the function that is controlled by the trigger input.
normal
: Normal operation.
pad song
: Controls playback of the pad song
*
.
click onoff
: Switches the click sound on/off.
inc drumkit
: Increases the value of the drum kit number by 1
(increment).
dec drumkit
: Decreases the value of the drum kit number by
1 (decrement).
trig bypass
: Switches the trigger bypass function on/off
(P. 28).
start/stop
: Controls playback of the main song
*
.
main song : The main song is the selected in the Drum Kit Play
mode, and is controlled from the panel (of MIDI/TO HOST jack).
pad song : According to this setting, playback of the pad song will
be controlled by the trigger input. The pad song can be played
independently of the main song. Also, up to 3 pad songs can be
played along with main song simultaneously.
* Refer to the [2 -7. Pad Song] for more information on setting the
Pad Song.
* When 3 pad songs have already been selected in another input
source, the “
pad song
” will not be displayed (“
------
” is dis-
played).
2-7. Pad Song
This function contains settings for the pad song.
These settings are affective when a trigger from the input source
q
, which is set in [2-6. Function], controls playback of the pad
song.
q
IN (Input Source)
Assigns the input source for the settings (Refer to P. 16).
w
Song Number
Assigns the song number (
1
-
127
) that is assigned to the pad song.
e
Repeat Playback
rp
: Repeats playback of the song (when the song reaches the end
it will start again from the beginning, continuously).
--
: Normal playback.
r
Playback Mode
play
: When a pad is hit, playback of the assigned pad song will
start/stop.
chse
: When the pad is hit, one measure of the assigned pad song
will start playback then pause.
ctof
: When the pad is hit, playback of the assigned pad song will
start/stop. However, if the pad song is set to “
ctof
” the
pad song will stop when another pad song with the “
ctof
”
setting is started. This function allows only one “
ctof
”
pad song to be played at a time.
KIT IN=kick
Hold Mode= off
KIT IN=kick
Key Off= disable w
KIT IN=kick
Func= normal
KIT IN=kick
Song= 1=--=play
w e r
w
q
q
q
w
q