CL Editor Owner’s Manual
57
7
ON (GEQ on/off)
Switches the currently selected GEQ module on/off.
8
LINK
This button links the settings of two adjacent odd-numbered/even-numbered 31BandGEQ modules, or the group A
and group B settings of a Flex15GEQ. When you click this button, a window will ask you for confirmation. Click the
buttons for the modules you want to use as the parameter copy-source and copy-destination. If you click the RESET
BOTH button, the parameters of both modules will be reset to the default state.
9
GEQ graph
This graph shows the response of the currently selected GEQ module.
0
GEQ faders
These faders cut/boost the frequency bands of the GEQ module. The value of each fader is shown in the numerical box
below it. Hold down the <Ctrl>(<
>) key and click to set the value to 0.00 dB.
A
EQ FLAT
This button resets all GEQ faders to the 0 dB position.
B
AVAILABLE BANDS (number of operable bands) (Flex15GEQ only)
For a Flex15GEQ, you can operate any fifteen of the thirty-one bands. This numerical display box shows the remaining
number of bands that can be operated. If you have operated fifteen bands, this number will be zero, and you won’t be
able to operate any additional bands. If you want to operate another band in this state, you’ll need to return a previ-
ously-operated band back to the 0 dB position.
●
31BandGEQ
7
0
A
8
9
A
8
7
B
0
●
Flex15GEQ
