CL Editor Owner’s Manual
36
❏
DCA GROUP/MUTE GROUP
1
DCA GROUP
Selects the DCA group (1–16) to which that channel belongs.
2
MUTE GROUP
Selects the mute group (1–8) to which that channel belongs.
3
DCA/MUTE
These buttons enable/disable DCA group and Mute group for the
channel.
❏
Fader
1
ON
Switches the input channel on/off.
If the corresponding channel is off, the fader will be grayed out.
2
Fader
Adjusts the input level of the input channel. A meter indicating the signal level is shown at
the right of the fader, and the current value is shown in the numerical box immediately
below. You can set this to the minimum value (–∞ dB) by holding down the <Ctrl>(<
>)
key of your computer keyboard and clicking the fader knob, or set it to the nominal value
(0.00 dB) by holding down the <Ctrl>(<
>) key and <Shift> key and clicking the fader
knob.
3
CUE
This button cue-monitors the signal of the input channel.
If the Channel Select/Sends On Fader checkbox in the System Setup dia-
log box is not checked, the [CUE] button will be hidden in the screen.
1
2
3
3
1
2
3
NOTE
