CL Editor Owner’s Manual
2
Overview of CL Editor
CL Editor enables you to remotely control a Yamaha CL mixing console (such as CL5, CL3, or CL1; hereinafter collectively
called “CL” in this document). CL Editor also enables you to save the parameter settings on your computer.
Configuring CL Editor
❏
System Setup
To open the System Setup dialogbox, choose [System Setup] from the [File] menu.
1
Network
Specify the IP Address of your CL console to com-
municate.
2
Model Select
Select the model of your CL (CL5/CL3/CL1) when
CL Editor is not synchronized with the CL console.
If CL Editor is synchronized with the CL console,
the model will automatically be selected and other
model options will be grayed out.
3
Channel Select/Sends On Fader
This checkbox enables you to specify whether or
not the CL console and CL Editor are linked to each
other for the following operations:
• Selecting channels
• Switching between normal mode and SENDS
ON FADER mode
• Switching between MIX and MATIRX in
SENDS ON FADER mode
• Selecting [CUE] buttons
If you do not check the box, the CL console and CL Editor will operate independently.
If the box is not checked, the [CUE] button will be hidden in each window.
4
Synchronization
This allows synchronization to be done automatically when a CL Editor file is loaded. This function is enabled by
default.
5
Window Control From Console
This option determines whether or not using the USER DEFINED KEYS on the console enables you to remotely open
and close the CL Editor windows.
6
Level Meter
This option specifies whether the level meter functionality will be enabled. By disabling the meter function you can
reduce the processing load caused by screen drawing and communication.
7
Confirmation
These check boxes specify whether a confirmation dialog box will appear when you store (Store Confirmation), recall
(Recall Confirmation), patch (Patch Confirmation), or make a patch change that would modify an existing patch (Steal
Patch Confirmation).
8
Administrator Password
Enter the Administrator password that was specified on the CL console. If this password is not entered correctly, it will
not be possible to synchronize from CL Editor to the CL console.
Getting Started
2
1
3
4
5
6
9
7
8
NOTE
