CL Editor Owner’s Manual
29
❏
EQ (EQUALIZER)
1
LIBRARY
Accesses the INPUT EQ page of the Library window.
2
ON
Switches the EQ (Parametric Equalizer) on/off of the currently selected channel.
3
EQ graph
Indicates the response for the EQ of the currently selected channel. To reset the EQ to flat response, hold down the
<Ctrl>(<
>) key of your computer keyboard and click the graph (The HPF setting will remain.)
4
Q
These knobs adjust the Q level of the frequency range selected in the EQ graph.
5
FREQ (FREQUENCY)
These knobs adjust the center frequency for the four bands LOW, LO-MID, HI-MID, and HIGH.
6
GAIN
These knobs adjust the Q, center frequency, and boost/cut amount for the four bands LOW, LO-MID, HI-MID, and
HIGH.
7
HIGH shelving
If this button is on, the HIGH EQ will be switched to a shelving type (the Q knob of the HIGH EQ will disappear.)
8
LPF (Low Pass Filter)
If this button is on, the HIGH EQ will function as a low pass filter. The Q knob of the HIGH EQ will disappear, and the
GAIN knob will act as the low pass filter on/off switch.
9
LOW shelving
If this button is on, the LOW EQ will be switched to a shelving type (the Q knob of the LOW EQ will disappear.)
0
TYPE I/TYPE II (EQ type)
Selects either TYPE I or TYPE II as the EQ type.
A
ATT (Attenuation)
Adjusts the amount of attenuation for the signal level of pre EQ.
4
7
8
9
2
1
3
6
5
A
0
