Yamaha Big Bear YFM400R Owner'S Manual Download Page 59

Page: 59 / 170

6-4

EBU00195

Reverse knob operation and reverse
driving

CAUTION:

Before shifting, stop the machine and re-
turn the throttle lever to its closed posi-
tion. Otherwise the transmission may be
damaged.

1. Bring the machine to a complete stop

and return the throttle lever to the closed
position with the transmission in neutral.

2. While applying the rear brake lever, turn

the reverse knob clockwise with your
right hand.

3. Shift the transmission into reverse by

pressing down on the shift pedal.

NOTE:

When in reverse, the reverse indicator light
should be on. If the light does not come on, ask
a Yamaha dealer to inspect the machine.

4. Check behind you for people or obsta-

cles, then release the rear brake lever.

5. Open the throttle lever gradually and con-

tinue to watch to the rear while backing.

WARNING

POTENTIAL HAZARD
Improperly operating in reverse.

WHAT CAN HAPPEN
You could hit an obstacle or person be-
hind you, resulting in serious injury.

HOW TO AVOID THE HAZARD
When you shift into reverse, make sure
there are no obstacles or people behind
you. When it is safe to proceed, go slow-
ly.

U5GW13.book Page 4 Tuesday, July 30, 2002 2:23 PM

Summary of Contents for Big Bear YFM400R











































































































































































Search results

Summary of Contents for Big Bear YFM400R

Reviews:

Related manuals for Big Bear YFM400R

Brands by name

Popular brands

Yamaha Big Bear YFM400R, Owner'S Manual

Search results

Summary of Contents for Big Bear YFM400R

Reviews:

Related manuals for Big Bear YFM400R

Brands by name

Popular brands