manualshive.com logo in svg

Yamaha Big Bear YFM400R, Owner'S Manual

Share
Download
Yamaha Big Bear YFM400R Owner'S Manual Download Page 152

9-3

EBU00530

B. STORAGE

Long term storage (60 days or more) of your
machine will require some preventive proce-
dures to guard against deterioration. After
thoroughly cleaning the machine, prepare for
storage as follows:

1. Fill the fuel tank with fresh fuel and add

the specified amount of Yamaha Fuel
Stabilizer and Conditioner or an equiva-
lent product.

NOTE:

Use of fuel stabilizer and conditioner elimi-
nates the need to drain the fuel system. Con-
sult a Yamaha dealer if the fuel system needs
to be drained instead.

2. Remove the spark plug, pour about one

tablespoon of SAE 10W30 or 20W40
motor oil in the spark plug hole and rein-
stall the spark plug. Ground the spark
plug wire and turn the engine over seve-
ral times to coat the cylinder wall with oil.

3. Lubricate all control cables.
4. Block up the frame to raise all wheels off

the ground.

5. Tie a plastic bag over the exhaust pipe

outlet to prevent moisture from entering.

6. If storing in a humid or salt-air atmo-

sphere, coat all exposed metal surfaces
with a light film of oil. Do not apply oil to
any rubber parts or the seat cover.

Specified amount:

1 oz of stabilizer to each gallon of fuel
(or 7.5 cc of stabilizer to each liter of 
fuel)

U5GW13.book  Page 3  Tuesday, July 30, 2002  2:23 PM

Summary of Contents for Big Bear YFM400R











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands