manualshive.com logo in svg

Yamaha Big Bear YFM400R, Owner'S Manual

Share
Download
Yamaha Big Bear YFM400R Owner'S Manual Download Page 40

4-17

EBU01104

Front shock absorber adjustment

The spring preload can be adjusted to suit the
rider’s weight and riding conditions.
Adjust the spring preload as follows.
To increase the spring preload, turn the ad-
justing ring in direction 

a

. 

To decrease the spring preload, turn the ad-
justing ring in direction 

b

.

NOTE:

_ 

A special wrench can be obtained at a
Yamaha dealer to make this adjustment. 

_

1. Spring preload adjusting ring

2. Position indicator

Standard position: B 

A - Minimum (soft) 
E - Maximum (hard)

WARNING

POTENTIAL HAZARD 
Improper shock absorber adjustment. 
WHAT CAN HAPPEN 
Uneven adjustment can cause poor
handling and loss of stability, which
could lead to an accident. 
HOW TO AVOID THE HAZARD 
Always adjust the shock absorbers on
the left and right side to the same set-
ting.

U5GW13.book  Page 17  Tuesday, July 30, 2002  2:23 PM

Summary of Contents for Big Bear YFM400R











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands