Yamaha Big Bear YFM400R Owner'S Manual Download Page 36

Page: 36 / 170

4-13

EBU00093

Fuel cock

The fuel cock supplies fuel from the fuel tank
to the carburetor.
The fuel cock has three positions.
OFF: With the lever in this position fuel will

not flow. Always turn the lever to this
position when the engine is not running.

ON:

With the lever in this position, fuel flows
to the carburetor. Normal riding is done
with the lever in this position.

RES: This indicates reserve. If you run out of

fuel while riding, turn the lever to this
position. THEN FILL THE FUEL TANK
AT THE FIRST OPPORTUNITY. After
refuelling, return the fuel cock lever to
the “ON” position.

U5GW13.book Page 13 Tuesday, July 30, 2002 2:23 PM

Summary of Contents for Big Bear YFM400R











































































































































































Search results

Summary of Contents for Big Bear YFM400R

Reviews:

Related manuals for Big Bear YFM400R

Brands by name

Popular brands

Yamaha Big Bear YFM400R, Owner'S Manual

Search results

Summary of Contents for Big Bear YFM400R

Reviews:

Related manuals for Big Bear YFM400R

Brands by name

Popular brands