manualshive.com logo in svg

Yamaha Big Bear YFM400R, Owner'S Manual

Share
Download
Yamaha Big Bear YFM400R Owner'S Manual Download Page 16

2-3

●

Always follow proper procedures for turning as described in this manual. Practice turning at low
speeds before attempting to turn at faster speeds. Do not turn at excessive speed. 

●

Never operate the ATV on hills too steep for the ATV or for your abilities. Practice on smaller
hills before attempting larger hills. 

●

Always follow proper procedures for climbing hills as described in this manual. Check the ter-
rain carefully before you start up any hill. Never climb hills with excessively slippery or loose
surfaces. Shift your weight forward. Never open the throttle suddenly or make sudden gear
changes. Never go over the top of a hill at high speed. 

●

Always follow proper procedures for going down hills and for braking on hills as described in
this manual. Check the terrain carefully before you start down any hill. Shift your weight back-
ward. Never go down a hill at high speed. Avoid going down a hill at an angle that would cause
the vehicle to lean sharply to one side. Go straight down the hill where possible. 

●

Always follow proper procedures for crossing the side of a hill as described in this manual.
Avoid hills with excessively slippery or loose surfaces. Shift your weight to the uphill side of the
ATV. Never attempt to turn the ATV around on any hill until you have mastered the turning
technique described in this manual on level ground. Avoid crossing the side of a steep hill if
possible. 

U5GW13.book  Page 3  Tuesday, July 30, 2002  2:23 PM

Summary of Contents for Big Bear YFM400R











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands