manualshive.com logo in svg

Yamaha Big Bear YFM400R, Owner'S Manual

Share
Download
Yamaha Big Bear YFM400R Owner'S Manual Download Page 72

7-4

RIDE WITH CARE AND GOOD 
JUDGEMENT

Get training if you are inexperienced. 

Beginners should get training from a certified
instructor. 
Become familiar with this ATV at slow speeds
first, even if you are an experienced operator.
Do not attempt to operate at maximum perfor-
mance until you are totally familiar with the
ATV’s handling and performance characteris-
tics.

Riding your ATV requires skills acquired
through practice over a period of time. 

Take the time to learn the basic techniques
well before attempting more difficult maneu-
vers.

WARNING

POTENTIAL HAZARD 
Operating this ATV without proper in-
struction. 
WHAT CAN HAPPEN 
The risk of an accident is greatly in-
creased if the operator does not know
how to operate the ATV properly in dif-
ferent situations and on different types
of terrain. 

HOW TO AVOID THE HAZARD 
Beginning and inexperienced operators
should complete the certified training
course offered by Yamaha. They should
then regularly practice the skills learned
in the course and the operating tech-
niques described in this Owner’s Manu-
al. 
For more information about the training
course, contact an authorized ATV deal-
er or call 1-800-887-2887.

U5GW13.book  Page 4  Tuesday, July 30, 2002  2:23 PM

Summary of Contents for Big Bear YFM400R











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands