manualshive.com logo in svg

Yamaha Big Bear YFM400R, Owner'S Manual

Share
Download
Yamaha Big Bear YFM400R Owner'S Manual Download Page 48

5-5

EBU01085

Fuel

Make sure there is sufficient gasoline in the
tank.

CAUTION:

_ 

Use only unleaded gasoline. The use of
leaded gasoline will cause severe damage
to internal engine parts, such as the valves
and piston rings, as well as to the exhaust
system. 

_

Your Yamaha engine has been designed to
use regular unleaded gasoline with a pump
octane number ([R+M]/2) of 86 or higher, or
research octane number of 91 or higher. If
knocking or pinging occurs, use a different
brand of gasoline or premium unleaded fuel.
Unleaded fuel will give you longer spark plug
life and reduced maintenance cost.

Recommended fuel: 

UNLEADED GASOLINE ONLY 

Fuel tank capacity: 

Total: 

15 L (3.3 Imp gal, 4.0 US gal) 

Reserve: 

4.0 L (0.9 Imp gal, 1.1 US gal)

U5GW13.book  Page 5  Tuesday, July 30, 2002  2:23 PM

Summary of Contents for Big Bear YFM400R











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands