Yamaha 5KM2-AE1, Service Manual

Page: 241 / 431

4 - 95
ENG
MIDDLE GEAR
2.Install:
●
Bearing retainer
1
*****************************************************
Installation steps:
●
Attach the folded rag
2
.
●
Secure the bearing housing edge in the vise.
●
Attach the bearing retainer wrench
3
.
●
Tighten the bearing retainer.
CAUTION:
The middle driven shaft bearing retainer
has left-handed threads. To tighten the
retainer turn it counterclockwise.
*****************************************************
3.Install:
●
Shims
1
●
Bearing housing
NOTE:
Install the shims so that the tabs are positioned
as shown in the illustration.
Bearing retainer wrench:
P/N. YM-04128, 90890-04128
T
R
.
.
Bearing retainer:
110 Nm (11.0 m • kg, 80 ft • lb)
LT
4.Install:
●
Universal joint yoke (rear side)
●
Washer
●
Nut
1
NOTE:
Use the universal joint holder
2
to hold the
yoke.
Universal joint holder:
P/N. YM-04062, 90890-04062
LT
T
R
.
.
97 Nm (9.7 m • kg, 70 ft • lb)