Yamaha 5KM2-AE1, Service Manual

Page: 382 / 431

9 - 17
– +
ELEC
ELECTRIC STARTING SYSTEM
C0NTINUITY
TURNS
3.Starter motor
●
Connect the battery positive terminal
1
and starter motor cable
2
using a jumper
lead
3
.
●
Check the operation of the starter motor.
*
*
WARNING
●
A wire that is used as a jumper lead must
have the equivalent capacity or more as
that of the battery lead, otherwise the
jumper lead may burn.
●
This check is likely to produce sparks, so
be sure that no flammable gas or fluid is
in the vicinity.
*
DOES NOT TURN
Repair or replace the starter motor.
4.Starter relay
●
Remove the starter relay from the wire har-
ness.
●
Connect the pocket tester (
Ω ×
1) and the
battery (12 V) to the starter relay terminals.
CONTINUITY
Battery (+) terminal
→
Blue/White terminal
1
Battery (–) terminal
→
Blue/Black terminal
2
Tester (+) lead
→
Red terminal
3
Tester (–) lead
→
Black terminal
4
●
Check the starter relay for continuity.
*
NO CONTINUITY
Replace the starter relay.