Yamaha 250B, Owner'S Manual

Page: 54 / 220

2-14
GB
000332
TRIP TIME BATT
Km/h
knot
mph
km
mile
SPEED
YAMAHA
set mode
EMU01274
Trip Meter
This meter displays the distance the boat
has traveled since the meter was last
reset.
Repeatedly push and release the “mode”
button until the indicator on the face of
the meter points to “TRIP”. To reset the
trip meter to “0”, press the “set” and
“mode” button together.
NOTE:
8
The trip distance is shown in kilometers
or miles depending upon the unit of
measurement
selected for the
speedometer.
8
The trip distance is kept in memory by
battery power. The stored data will be
lost if the battery is disconnected.
EMU01275
Clock
This meter shows the current time.
Repeatedly push and release the “mode”
button until the indicator on the face of
the meter points to “TIME.” To set the
clock, be sure the meter is in the “TIME”
mode. Press the “set” button; the hour
display will begin blinking. Press the
“mode” button until the desired hour is
displayed. Press the “set” button again,
the minute display will begin blinking.
Press the “mode” button until the desired
minute is displayed. Press the “set” but-
ton again to start the clock.
NOTE:
The clock operates on battery power. Dis-
connecting the battery will stop the clock.
Reset the clock after connecting the bat-
tery.
000331
TRIP TIME BATT
Km/h
knot
mph
km
mile
SPEED
YAMAHA
set mode
65L-9-75-A0-2 3/29/02 9:59 PM Page 30